|
Twitter
|
Facebook
|
Google+
|
VKontakte
|
LinkedIn
|
Viadeo
|
English
|
Français
|
Español
|
العربية
|
 
International Journal of Innovation and Applied Studies
ISSN: 2028-9324     CODEN: IJIABO     OCLC Number: 828807274     ZDB-ID: 2703985-7
 
 
Friday 29 March 2024

About IJIAS

News

Submission

Downloads

Archives

Custom Search

Contact

  • Contact us
  • Newsletter:

Connect with IJIAS

  Now IJIAS is indexed in EBSCO, ResearchGate, ProQuest, Chemical Abstracts Service, Index Copernicus, IET Inspec Direct, Ulrichs Web, Google Scholar, CAS Abstracts, J-Gate, UDL Library, CiteSeerX, WorldCat, Scirus, Research Bible and getCited, etc.  
 
 
 

An investigation on effect of mean stress on bending fatigue failures of compressor valve reeds


Volume 32, Issue 1, February 2021, Pages 63–69

 An investigation on effect of mean stress on bending fatigue failures of compressor valve reeds

Kévin M. Tsapi Tchoupou1, Bertin D. Soh Fotsing2, and Desire Ndjanfang3

1 Department of Petroleum Engineering, National Higher Polytechnic Institute, University of Bamenda, P.O. Box 39 Bambili, Cameroon
2 Department of Mechanical Engineering, Bandjoun University Institute of Technology, University of Dschang, P.O. Box 134 Bandjoun, Cameroon
3 Department of Mechanical and Industrial Engineering, National Higher Polytechnic Institute, University of Bamenda, P.O. Box 39 Bambili, Cameroon

Original language: English

Copyright © 2021 ISSR Journals. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract


Reed valves in a compressor are critical parts that have a high fatigue failure potential due to cyclic bending and impact caused by the cyclic nature of the compression process. A sudden failure of a valve renders the compressor useless. Although the refining process of methods of fatigue design has already taken more than 50 years, older criteria such as Gerber and Goodman models are still attractive for engineering design of high cycle fatigue components. This paper presents an investigation on the effect of nonzero mean stress on the design of valve reeds that are widely used in compressors. The investigation relates the choice of a mean stress compensation models, with the predicted fluctuating bending fatigue strength and estimated safety coefficient values. The calculations have been performed using Gerber, Goodman, Soderberg, ASME, Crossland, and Tsapi-Soh models. The most relevant goal of this paper is to verify the efficiency of classical and advanced stress based multiaxial fatigue criteria to estimated value of fluctuating bending fatigue strength. The criterion proposed by Tsapi-Soh was found to gives estimated value of the fluctuating bending fatigue strength very close to the typical value from technical data and satisfying results in predicting the survival of the reed valves under bending fatigue failure.

Author Keywords: Mean stress effect, fatigue limit, fatigue criteria, safety coefficient, sandvik.


How to Cite this Article


Kévin M. Tsapi Tchoupou, Bertin D. Soh Fotsing, and Desire Ndjanfang, “An investigation on effect of mean stress on bending fatigue failures of compressor valve reeds,” International Journal of Innovation and Applied Studies, vol. 32, no. 1, pp. 63–69, February 2021.