|
Twitter
|
Facebook
|
Google+
|
VKontakte
|
LinkedIn
|
Viadeo
|
English
|
Français
|
Español
|
العربية
|
 
International Journal of Innovation and Applied Studies
ISSN: 2028-9324     CODEN: IJIABO     OCLC Number: 828807274     ZDB-ID: 2703985-7
 
 
Friday 29 March 2024

About IJIAS

News

Submission

Downloads

Archives

Custom Search

Contact

  • Contact us
  • Newsletter:

Connect with IJIAS

  Now IJIAS is indexed in EBSCO, ResearchGate, ProQuest, Chemical Abstracts Service, Index Copernicus, IET Inspec Direct, Ulrichs Web, Google Scholar, CAS Abstracts, J-Gate, UDL Library, CiteSeerX, WorldCat, Scirus, Research Bible and getCited, etc.  
 
 
 

Extraction and Characterization of Drilling Fluid from Castor Oil


Volume 3, Issue 2, June 2013, Pages 382–387

 Extraction and Characterization of Drilling Fluid from Castor Oil

Manase Auta1

1 School of Chemical Engineering, Engineering Campus, Universiti Sains Malaysia, 14300 Nibong Tebal, Pulau Penang, Malaysia

Original language: English

Copyright © 2013 ISSR Journals. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract


Drilling fluid is an essential component in drilling operations. It is used to prevent blowouts by creating adequate hydrostatic pressure, lubricating the walls of a well and the drill string, flushing to the surface of cuttings, and keeping the drill bit clean and cool. Extraction, characterization and formation of drilling fluid from castor seed oil were investigated. The castor seeds used were obtained from a local market and the extraction of the oil was done mechanically. The extracted oil characteristics such as specific gravity, pH, acid value, iodine value, saponification value, refractive index and viscosity were within the standard range before before formulating it to drilling fluid by the addition of additives. The result of the formulation obtained showed that the formulated drilling fluid had an electrical stability of 222 V, High Pressure/High Temperature of 8.8, mass funnel viscosity at 30 and 50 oC were 26.5 and 25 s, respectively; chemical alkalinity was 0.3 and excess lime of 0.39 Ib/bbI. The findings in this research have shown that formulated drilling fluid from castor seed oil is safe as drilling fluid and has characteristics close to that of the standard drilling mud equivalent circulating density 99. The formulated drilling fluid can adequately serve as an alternative to the commercial products.

Author Keywords: Formulation, Castor seeds, Drilling mud, Oil, Borehole, Lubrication, Petroleum.


How to Cite this Article


Manase Auta, “Extraction and Characterization of Drilling Fluid from Castor Oil,” International Journal of Innovation and Applied Studies, vol. 3, no. 2, pp. 382–387, June 2013.