|
Twitter
|
Facebook
|
Google+
|
VKontakte
|
LinkedIn
|
Viadeo
|
English
|
Français
|
Español
|
العربية
|
 
International Journal of Innovation and Applied Studies
ISSN: 2028-9324     CODEN: IJIABO     OCLC Number: 828807274     ZDB-ID: 2703985-7
 
 
Saturday 07 December 2019

About IJIAS

News

Submission

Downloads

Archives

Custom Search

Contact

Connect with IJIAS

  Now IJIAS is indexed in EBSCO, ResearchGate, ProQuest, Chemical Abstracts Service, Index Copernicus, IET Inspec Direct, Ulrichs Web, Google Scholar, CAS Abstracts, J-Gate, UDL Library, CiteSeerX, WorldCat, Scirus, Research Bible and getCited, etc.  
 
 
 

Statistical tolerance analysis by integrating form deviations


Volume 9, Issue 3, November 2014, Pages 1281–1290

 Statistical tolerance analysis by integrating form deviations

Mouhssine Chahbouni1, S. Boutahari2, and Driss Amegouz3

1 Laboratoire de Productique, Energétique et Développement Durable, Université Sidi Mohammed Ben Abdellah/Ecole Supérieure de Technologie, BP 2427 Route Imouzzer30000 Fès, Morocco
2 Laboratoire de Productique, Energétique et Développement Durable, Université Sidi Mohammed Ben Abdellah/Ecole Supérieure de Technologie, BP 2427 Route Imouzzer30000 Fès, Morocco
3 Laboratoire de Productique, Energétique et Développement Durable, Université Sidi Mohammed Ben Abdellah/Ecole Supérieure de Technologie, BP 2427 Route Imouzzer30000 Fès, Morocco

Original language: English

Received 29 September 2014

Copyright © 2014 ISSR Journals. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract


The objective of this paper is to present the analysis of geometric tolerances of the assembly design with the deviations and clearance method, for this we will study initially the tolerance analysis using the worst case method, in a second step we will integrate statistical Tolerancing approach, and finally we will integrate form deviations of the parts to study the impact of these deviations on the tolerance analysis.
To illustrate this process of analysis we used a classic case of assembly and we considered the location tolerance (perpendicularity) and the form tolerance (flatness).
Finally, a comparative study between the two statistical methods was illustrated.


Author Keywords: Tolerance analysis, Deviations and Clearance method, Worst case method, Form deviations, Statistical method.


How to Cite this Article


Mouhssine Chahbouni, S. Boutahari, and Driss Amegouz, “Statistical tolerance analysis by integrating form deviations,” International Journal of Innovation and Applied Studies, vol. 9, no. 3, pp. 1281–1290, November 2014.