|
Twitter
|
Facebook
|
Google+
|
VKontakte
|
LinkedIn
|
Viadeo
|
English
|
Français
|
Español
|
العربية
|
 
International Journal of Innovation and Applied Studies
ISSN: 2028-9324     CODEN: IJIABO     OCLC Number: 828807274     ZDB-ID: 2703985-7
 
 
Wednesday 26 June 2019

About IJIAS

News

Submission

Downloads

Archives

Custom Search

Contact

Connect with IJIAS

  Now IJIAS is indexed in EBSCO, ResearchGate, ProQuest, Chemical Abstracts Service, Index Copernicus, IET Inspec Direct, Ulrichs Web, Google Scholar, CAS Abstracts, J-Gate, UDL Library, CiteSeerX, WorldCat, Scirus, Research Bible and getCited, etc.  
 
 
 

NATURAL CONVECTION HEAT TRANSFER FROM A HEAT SINK WITH FINS OF DIFFERENT CONFIGURATION


Volume 9, Issue 3, November 2014, Pages 1043–1047

 NATURAL CONVECTION HEAT TRANSFER FROM A HEAT SINK WITH FINS OF DIFFERENT CONFIGURATION

Murtadha Ahmed1 and Abdul Jabbar N. Khalifa2

1 Mechanical engineering department, Alnahrain University, P.O. Box 64040, Baghdad, Iraq
2 Mechanical engineering department, Alnahrain University, P.O. Box 64040, Baghdad, Iraq

Original language: English

Received 8 October 2014

Copyright © 2014 ISSR Journals. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract


Experiments were carried out on natural convection heat transfer from square pin fin heat sinks subject to the influence of its geometry and heat flux. A total of 50 fins were bolted into the upper surface of the base plate. The area of the base plate is 250mm by 250mm. The base plate and the fins were made of aluminum .Over the tested range of Rayleigh number, 12.45

Author Keywords: Natural convection, Square solid/perforated pin fin, Heat sinks.


How to Cite this Article


Murtadha Ahmed and Abdul Jabbar N. Khalifa, “NATURAL CONVECTION HEAT TRANSFER FROM A HEAT SINK WITH FINS OF DIFFERENT CONFIGURATION,” International Journal of Innovation and Applied Studies, vol. 9, no. 3, pp. 1043–1047, November 2014.