|
Twitter
|
Facebook
|
Google+
|
VKontakte
|
LinkedIn
|
Viadeo
|
English
|
Français
|
Español
|
العربية
|
 
International Journal of Innovation and Applied Studies
ISSN: 2028-9324     CODEN: IJIABO     OCLC Number: 828807274     ZDB-ID: 2703985-7
 
 
Tuesday 25 September 2018

About IJIAS

News

Submission

Downloads

Archives

Custom Search

Contact

Connect with IJIAS

  Now IJIAS is indexed in EBSCO, ResearchGate, ProQuest, Chemical Abstracts Service, Index Copernicus, IET Inspec Direct, Ulrichs Web, Google Scholar, CAS Abstracts, J-Gate, UDL Library, CiteSeerX, WorldCat, Scirus, Research Bible and getCited, etc.  
 
 
 

Treatment models colored (red and indigo cibacrone) solutions using the methods of adsorption (anion resin A500) and ultrafiltration


[ Traitement des solutions modèles colorées (indigo et rouge cibacrone) en utilisant les procédés de l'adsorption (résine anionique A500) et l'ultrafiltration ]

Volume 7, Issue 3, August 2014, Pages 875–882

 Treatment models colored (red and indigo cibacrone) solutions using the methods of adsorption (anion resin A500) and ultrafiltration

Tarik LAKDIOUI1 and Ahmed El Harfi2

1 Laboratory of Polymers, Radiation and Environment (LPRE) - Team of Organic and Macromolecular Chemistry (TOMC), Department of Chemistry, University Ibn Tofail, Faculty of Sciences, Kenitra, Morocco
2 Laboratory of Polymers, Radiation and Environment (LPRE) - Team of Organic and Macromolecular Chemistry (TOMC), Department of Chemistry, University Ibn Tofail, Faculty of Sciences, Kenitra, Morocco

Original language: French

Received 27 June 2014

Copyright © 2014 ISSR Journals. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract


In this work, we eliminated models colored solutions (indigo and red cibacrone). For this we used respectively the adsorption method using A500 anionic resin as an adsorbent and by the ultrafiltration process using a synthetic semipermeable membrane made of polysulfone and titanium dioxide as filler.
From the results obtained, we observed that the values of the rate of decolorization by adsorption treated colored solutions were registered in 92% and 80% respectively for red cibacrone couples / anion resin A500 and indigo / anionic resin A500 a part. And in the case of ultrafiltration the results were recorded by 90% and 74.42% respectively of patterns of red colored solutions and indigo cibacrone other.


Author Keywords: Indigo Red cibacrone anionic resin, adsorption and Ultrafiltration.


Abstract: (french)


Au cours de ce travail, nous avons éliminé les solutions modèles colorées (l'indigo et rouge cibacrone). Pour cela nous avons utilisé respectivement la méthode d'adsorption en utilisant la résine anionique A500 comme un adsorbant et par le procédé d'ultrafiltration en utilisant une membrane synthétique semi perméable à base de polysulfone et de dioxyde de titane comme charge.
D'après les résultats obtenus, nous avons observé que les valeurs de taux de décoloration des solutions colorées traitées par l'adsorption ont été enregistrées de 92% et de 80% respectivement pour les couples rouges cibacrone/résine anionique A500 et l'indigo/résine anionique A500 d'un part. Et dans le cas de l'ultrafiltration les résultats obtenus ont été enregistrées de 90% et de 74.42% respectivement pour les solutions modèles colorées de rouge cibacrone et l'indigo d'autre part.


Author Keywords: Indigo, Rouge cibacrone, Résine anionique, Adsorption et Ultrafiltration.


How to Cite this Article


Tarik LAKDIOUI and Ahmed El Harfi, “Treatment models colored (red and indigo cibacrone) solutions using the methods of adsorption (anion resin A500) and ultrafiltration,” International Journal of Innovation and Applied Studies, vol. 7, no. 3, pp. 875–882, August 2014.