|
Twitter
|
Facebook
|
Google+
|
VKontakte
|
LinkedIn
|
Viadeo
|
English
|
Français
|
Español
|
العربية
|
 
International Journal of Innovation and Applied Studies
ISSN: 2028-9324     CODEN: IJIABO     OCLC Number: 828807274     ZDB-ID: 2703985-7
 
 
Thursday 28 March 2024

About IJIAS

News

Submission

Downloads

Archives

Custom Search

Contact

  • Contact us
  • Newsletter:

Connect with IJIAS

  Now IJIAS is indexed in EBSCO, ResearchGate, ProQuest, Chemical Abstracts Service, Index Copernicus, IET Inspec Direct, Ulrichs Web, Google Scholar, CAS Abstracts, J-Gate, UDL Library, CiteSeerX, WorldCat, Scirus, Research Bible and getCited, etc.  
 
 
 

Effect of Variation of Number of Bays on the Seismic Vulnerability of Masonry Infilled Steel and Reinforced Concrete (RC) frame Structures


Volume 8, Issue 4, October 2014, Pages 1485–1495

 Effect of Variation of Number of Bays on the Seismic Vulnerability of Masonry Infilled Steel and Reinforced Concrete (RC) frame Structures

Muhammad Khubaib Ilyas Khan1, Saim Raza2, and Furqan Munir3

1 Department of Civil Engineering, National University of Sciences and Technology (NUST), 44000, Islamabad, Pakistan
2 Department of Civil Engineering, National University of Sciences and Technology (NUST), 44000, Islamabad, Pakistan
3 Department of Civil Engineering, National University of Sciences and Technology (NUST), 44000, Islamabad, Pakistan

Original language: English

Copyright © 2014 ISSR Journals. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract


In general practice, buildings can range from small residential houses to large commercial plazas. Size of the structure may change at base with the type of building and availability of area. Bay analysis has been performed to analyze the effect of variation in number of bays on infilled frames. Four three storey models (Bare and Masonry infilled) with number of bays varying from one to four have been considered in this study. Non-linear static analysis or pushover analysis has been performed in Perform-3D and capacity spectrum method of ATC-40 followed by seismic vulnerability assessment framework proposed by Kyriakides (2007) have been used to derive the vulnerability curves for all models considered in this study. Results of seismic vulnerability assessment have been used to determine the effect of variation of number of bays on the seismic vulnerability of masonry infilled steel and RC frames. Vulnerability curves of bare frames have also been compared with the vulnerability curves of infilled frames for both steel and RC frame structures to determine the percentage decrease in the seismic vulnerability of masonry infilled frames as compared to bare frames.

Author Keywords: Bay analysis, Masonry infill, Perform-3D, Seismic vulnerability assessment, Seismic vulnerability curves, Infilled steel frames, Infilled RC frames, Capacity Spectrum method.


How to Cite this Article


Muhammad Khubaib Ilyas Khan, Saim Raza, and Furqan Munir, “Effect of Variation of Number of Bays on the Seismic Vulnerability of Masonry Infilled Steel and Reinforced Concrete (RC) frame Structures,” International Journal of Innovation and Applied Studies, vol. 8, no. 4, pp. 1485–1495, October 2014.